TM 9-2320-279-34-1
Engine Maintenance Instructions (Cont)
3-3. ENGINE REMOVAL/INSTALLATION (CONT).
b. Installation.
WARNING
Keep out from under engine when
lifting into vehicle. If engine slips,
sways, or falls, serious injury or death
may result.
CAUTION
Install lifting hooks facing outward.
Before lifting engine completely off
supports, test by lifting slightly to see
if balanced. If engine starts to tilt,
lower and adjust chain lengths.
Unbalanced engine can swing causing
damage.
Make sure hoses and wires are secured
and moved out of the way when
installing engine so they do not
snag and cause damage.
NOTE
Attach chain with lifting hooks facing out and with front leg under exhaust pipe.
(1) Install 39-in. (1 m) lifting chain on two side lifting brackets (1).
(2) Install 37-in. (94 cm) chain on forward lifting bracket (2).
(3) Soldier A operates lifting device and lifts engine (3) slightly, while Soldier B checks that engine is
balanced.
CAUTION
Make sure engine is centered to prevent damage to bell-housing.
(4) Soldier A operates lifting device and positions engine (3) in vehicle, while Soldier B and Soldier C
guide engine.
3-14