TM 9-2320-279-34-1
Electrical System Maintenance (Cont)
6-15.1 CHASSIS WIRING HARNESS REMOVAL/INSTALLATION (M984E1) (CONT).
NOTE
Do steps (26, 27, and 28) for
both right and left rear
clearance light and taillight
wires. Right side shown.
(25)
(26)
(27)
Install clearance light
connectors (65) through
grommet (66). Connect
connector (65) to wire (56).
Connect four taillight
wires (57).
Install cover (67)
screws (68),
lockwashers (69) and
nuts (70).
(28)
Install trailer electrical
connector (71) trailer
electrical connector
cover (72) four screws (73)
three lockwashers (74), two
wires (75), two
lockwashers (76) and
four nuts (77).
c. Follow-on Maintenance.
(1)
Install skid plate grille (TM 9-2320-279-20).
(2)
Connect batteries (TM 9-2320-279-20).
END OF TASK
6-122.12