TM-9-2320-279-34-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 1 OF 3

TM-9-2320-279-34-1 - Page 427 of 709

TM 9-2320-279-34-1

Transmission Maintenance Instructions (Cont)

(5)

(6)

(7)

(8)

(9)

(10)

Install roller bearing (6) on roller race (7).

Install roller race (7) in stator (1) until roller bearing (6) is near stator roller holder.

Remove stator roller holder by pulling on attached string.

Push roller race (7) inward while turning roller race clockwise until roller bearing (6) seats.

Position stator (1) with roller race (7) up.

Turn roller race (7) counterclockwise to lock in place.

e. Installation.

CAUTION

Keep outer face of stator down so bearings and springs

will not fall out.

(1)

Hold stator (1) with thrust pads (2) away from

transmission (3).

CAUTION

Stator must turn freely in clockwise direction and lock up

in counterclockwise direction to operate properly and

prevent damage to equipment.

(2)

Install stator (1) on shaft (4).

f. Follow-on Maintenance.

Install flywheel assembly (para 7-6).

END OF TASK

7-49