TM-9-2320-279-34-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 1 OF 3

TM-9-2320-279-34-1 - Page 494 of 709

Transmission Maintenance Instructions (Cont)

(5)

Lightly coat one side of gasket (5) with grease.

(6)

Set gasket (5) on transmission (3) with greased

of gasket down.

side

TM 9-2320-279-34-1

(7)

Aline holes in gasket (5) with holes in transmission (3).

(8)

Install sling lifting device on rear cover (6).

NOTE

There are two different size dowel pins on screw flange

face of rear cover to help aline cover with transmission.

(9)

Soldier A alines screw holes and installs rear

cover (6) on transmission (3) while Soldier B

operates lifting device. Soldier B removes lifting

device.

(10)

Install 21 screws (7) with lockwashers (8).

(11)

Install three screws (9) with lockwashers (10).

(12)

Tighten screws (7 and 9) alternately to 67 to

80 lb-ft (91 to 108 N•m).

(13)

Remove nut (11) and yoke (12).

f.

Follow-on Maintenance.

(1)

Install governor (para 7-23).

(2)

Install output yoke, dust shield, and oil seal (para 7-14).

END OF TASK

Change 3

7-115