TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

TM-9-2320-279-34-2 - Page 465 of 632

TM 9-2320-279-34-2

Cab and Body Maintenance Instructions (Cont)

b. Installation.

NOTE

The following steps apply to both sides of vehicle. Passenger

side is shown.

(1) Install bracket (1) and spacer (2) with screw (3), washer (4),

and locknut (5).

(2) Install three screws (6) and locknuts (7). Do not tighten.

(3) Install three screws (8) and nuts (9). Tighten nuts to 375 lb-ft

(509 N·m).

(4) Tighten locknuts (7).

Install bracket (10), screw (11), washer (12), and

(5)

nut (13) .

(6) Install three screws (14) and locknuts (15).

(7) Install two screws (16), washers (17),

sleeves (18), springs (19), four washers (20

and 21), and two locknuts (22).

(8) Tighten each locknut (22) until each spring (19)

is compressed to 3-5/8 in. (92 mm).

(9) Install bracket (23), screw (24), washer (25), and

locknut (26).

(10) Install two screws (27), lockwashers (28), and

nuts (29).

c. Follow-on Maintenance.

Install fuel tank (when

left front bracket is removed) (TM 9-2320-279-20).

END OF TASK

15-53