TM-9-2320-279-34-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3
TM-9-2320-279-34-2 - Page 53 of 632
TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
TA476357
NOTE
Gear rotation on axle 650 is opposite of 480 and 580. Axle 650 will be shown
throughout entire task.
(21) Remove lockwire from two screws (27).
(22) Remove cotter pin (28) and adjuster lock (29) from bearing cap (30).
(23) Mark center of bearing cap (30) and remove two screws (27) and bearing cap.
NOTE
Side of ring gear away from gear teeth
must be lifted first to prevent gear from
catching on differential carrier casting.
(24)
(25)
Soldier A removes ring gear (20) and
differential (31) as an assembly from
differential carrier (32) while
Soldier B operates lifting device. Place
ring gear, teeth up, on clean work
surface and remove lifting device.
Remove two bearing adjusters (33
and 34) and bearing cups (35 and 36).
10-3 5
Back to Top
