TM-9-2320-279-34-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3
TM-9-2320-279-34-2 - Page 96 of 632
TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-12. DIFFERENTIAL CARRIER, AXLE NO. 4 (AXLE MODELS 480 AND 580) REPAIR
(CONT).
NOTE
Axle Model 480 does not have spacer washer.
(39) Remove outer bearing cone (34), spacer (33), spacer
washer (32), and inner bearing cone (31) from bearing
cage (29).
(40)
Get spacer (33) 0.001-in. (0.03 mm) thicker than last
spacer used and set aside for later installation.
(41) Lubricate and press pilot bearing (35) on pinion (36).
(42) Stake pilot bearing (35) and pinion (36) as shown in
pattern.
(43)
(44)
Lubricate and press inner bearing cone (31) on pinion (36).
NOTE
Axle Model 480 does not have spacer washers.
Install spacer washer (32) and spacer (33) on pinion (36).
10-78
Back to Top
