TM 9-2320-279-34-3
Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)
(16)
Install bearing spacer (27) and two roller
bearings (28) on output shaft (15).
(17)
Aline splines on inner clutch gear (18) with
splines in output gear (29) and install output
gear on output shaft (15).
(18)
Install bearing washer (30) and ball bearing (31) on
output shaft (15).
(19)
Install oil seal (32) and breather (33) in open-end
bearing cover (34).
(20)
Install seal (35), washer (36), and retaining ring (37) in
closed-end bearing cover (38).
19-10