TM-9-2320-279-34-3

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3

TM-9-2320-279-34-3 - Page 388 of 717

TM 9-2320-279-34-3

Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)

(19)

Install roller assembly (29), bearing spacer (30), and roller

assembly (29) into input gear (31).

NOTE

Line up flat spot on idler shaft with setscrew hole.

(20)

Install idler shaft (32), with slot facing out, in PTO (22) until about 1/4 in. (6 mm) shows in

opening in PTO.

(21)

Install thin thrust washer (33), thrust bearing (34), and thick thrust washer (35) on idler

shaft (32).

(22)

Install input gear (31) on idler shaft (32) and press idler shaft through input gear, leaving space to

install thrust washers (33 and 35) and thrust bearing (34).

(23)

Install thin thrust washer (33), thrust bearing (34), and thick thrust washer (35) under input

gear (31).

(24)

Press idler shaft (32) into PTO (22).

19-12.9