TM 9-2320-279-34-3
Arctic Heater Kit Maintenance Instructions (Cont)
NOTE
New brushes have a six degree angle on the
brush face. Brush should always be installed
so that the angle is open away from the pump
end of the motor.
(18)
Install two brush and spring
assemblies (29), brush caps (30), and
brush shields (31) in brush head (4)
with four screws (32) and
lockwashers (33).
d.
Follow-on Maintenance.
Install arctic kit coolant pump (TM 9-2320-279-20).
END OF TASK
Change 3
21-11/(21-12 blank) (21-12 thru 21-18 deleted)