TM-9-2320-280-10

TRUCK, UTILITY: M998 SERIES

OPERATOR’S MANUAL

JANUARY 1996

  TM-9-2320-280-10 - Page 95 of 405

TM 9-2320-280-10
KEY
ITEM AND FUNCTION
1
Electrical control panels
provide centralized control of lighting, heating, and ventilation for
ambulance interior.
2
Blackout lamp
(one per side) provides blue light illumination during blackout conditions.
3
Strap assemblies
(four per side) provide an assist to patients and crew when moving about in
ambulance interior.
4
Ceiling lamps
(two per side) provide white light illumination for ambulance interior.
5
Splint set stowage strap assemblies
(two each) secure splint set in stowed position.
6
Oxygen cylinder straps, footman loops, and bumpers
provide stowage for oxygen cylinders on each
bulkhead.
7
Attendant seat bracket and strap assembly
provides stowage for attendant seat.
8
Attendant seat
shown in stowed position.
When installed on attendant seat rails, provides a
movable seat for ambulance attendant.
9
Spineboard bracket and strap assembly
provides stowage for short spineboard.
10
Medical instrument and supply set stowage strap assembly
(two per side) secures medical
instruments and supplies in stowage.
11
24-volt receptacle
(two each) provides a 24-VDC electrical source for ambulance accessories.
The
other 24-volt receptacle is located on the electrical control panel.
12
Ambulatory patient seat latch
(one per side) secures folding patient seat back in closed position.
13
Ambulatory patient seat
provides seating for three ambulatory patients on each side of ambulance.
14
Stowage area under litter rack
provides additional stowage space.
15
Portable heart monitor stowage
provides storage area for portable heart monitor.
16
Bulkhead doors
(two each) provide walk-through access between vehicle cab and ambulance
interior.
Left bulkhead door must be closed before right door is closed and latched.
17
Shelf assembly
provides area in front of bulkhead for blanket kit and splint kit stowage.
18
Bulkhead door handle
latches bulkhead door closed when handle is turned to vertical position.
19
Heater/fresh air vent
directs heated air during heater operation or fresh air if ventilation system is
activated.
20
Blanket set stowage strap assembly
secures medical blanket set in stowed position.
2-46


Back to Top