TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 825 of 951

8-6. RUNFLAT COMPRESSOR (P/N J39250) BELT REPLACEMENT

This task covers:

a. Removal

b. Installation

Manual References

TM 9-2320-280-24P

NOTE

Note position of belt for installation.

1. Remove small pin (8) from belt (4) and worm gear shaft assembly (1). Discard small pin (8).

2. Remove shaft pin (7) and worm gear shaft assembly (1) from compressor assembly (6). Discard shaft

pin (7).

3. Remove two locknuts (5), sockethead screws (2), spacers (3), and belt (4) from compressor

assembly (6). Discard locknuts (5).

NOTE

Belt overlap is to be positioned so that you have equal amount of

belt on each side of worm gear shaft assembly.

1. Install belt (4) on compressor assembly (6) with two spacers (3), sockethead screws (2), and lock-

nuts (5).

2. Install worm gear shaft assembly (1) on compressor assembly (6) with shaft pin (7).

3. Install belt (4) to worm gear shaft assembly (1) with small pin (8).

b. Installation

a. Removal

Change 3

8-25

TM 9-2320-280-20-2

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Runflat belt repair kit

(Appendix G, Item 276)

1

2

3

4

5

6

7

8