TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 1058 of 1168

TM 9-2320-280-20-3

Change 1

D - 8 5

INSTRUCTIONS:

1.

Locate, mark, and drill 0.138-in. diameter hole (1) in mini-box bottom section (4) as shown.

2.

Locate, mark, and drill two 1.250-in. diameter holes (2) in mini-box bottom section (4) as shown.

3.

Locate, mark, and drill four 0.190-in. diameter holes (3) in mini-box bottom section (4) as shown.

4.

Locate, mark, and drill fourteen 0.138-in. diameter holes (5) in mini-box bottom section (4) as shown.

5.

Locate, mark, and drill two 0.750-in. diameter holes (6) in mini-box bottom section (4) as shown.

6.

Install six non-metallic bumpers (9) on mount holes on mini-box bottom section (4) with washers (8),

screws (7), and nuts (10) as shown.

Figure D-100.

Mini-box Bottom Section Drill Procedure (Cont’d).