TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 198 of 1168

10-98.

“

A

”

PILLAR FORMER ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Remove thirteen screws (3) and “A” pillar former (2) from “A” pillar (1).

2.

Clean weatherstrip from “A” pillar (1).

3.

Inspect turnbutton stud (4) for damage. Replace if damaged.

INITIAL SETUP:

Applicable Models

M998, M998A1, M1035, M1035A1, M1035A2,

M1037, M1038, M1038A1, M1042

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Turnbutton stud (Appendix G, Item 303)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Soft top removed (TM 9-2320-280-10).

b. Installation

1.

Peel backing paper from “A” pillar former (2).

2.

Install “A” pillar former (2) on “A” pillar (1) with thirteen screws (3).

FOLLOW-ON TASK: Install soft top (TM 9-2320-280-10).

TM 9-2320-280-20-3

Change 2

10-167