TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 522 of 1168

11-177. ATTENDANT SEAT STOWAGE BRACKETS REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove four screws (3) and two footman loops (5) from body (1), and remove

strap assembly (2)

from footman loops (5).

2.

Remove eight rivets (6) and two brackets (7) from body (1).

3.

Inspect blind rivet (4) for damage. Replace if damaged.

NOTE

• For instructions on replacement of rivets, refer to para. 10-66.

• Replacement procedures for attendant seat stowage brackets are

basically the same for M996, M996A1, M997, M997A1, and

M997A2 ambulances, with the exception of the strap assembly. The

strap assembly is mounted in a vertical position on the body of the

M996 and M996A1 ambulance. This procedure covers the atten-

dant seat stowage brackets in the M997, M997A1, and M997A2

ambulances.

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Eight blind rivets (Appendix G, Item 251)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Attendant seat removed from stowed position

(TM 9-2320-280-10).

b. Installation

1.

Install two brackets (7) on body (1) with eight rivets (6).

2.

Install strap assembly (2) on two footman loops (5) and install footman loops (5) on body (1) with

four screws (3).

FOLLOW-ON TASK: Stow attendant seat (TM 9-2320-280-10).

TM 9-2320-280-20-3

Change 2

11-259