TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 746 of 1168

a. Removal

b. Installation

TM 9-2320-280-20-3

12-96. TROOP/CARGO WINTERIZATION HEATER DIVERTER ASSEMBLY

REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

Manual References

M998, M998A1, M1038, M1038A1

TM 9-2320-280-24P

Tools

General Safety Instructions

General mechanic’s tool kit:

Ensure handle on diverter assembly is facing

automotive (Appendix B, Item 1)

toward left side of vehicle.

1. Remove clamp (2) and flex duct (3) from diverter assembly (1).

2. Remove clamp (5) and diverter assembly (1) from air inlet adapter (4).

WARNING

Ensure handle on diverter assembly is facing toward left side of

vehicle. Improper installation of the diverter assembly may cause

serious injury to personnel.

1. Install diverter assembly (1) on air inlet adapter (4) with clamp (5).

2. Install flex duct (3) on diverter assembly (1) with clamp (2).

12-140