TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 788 of 1168

12-119. TROOP/CARGO WINTERIZATION TOP COVER ASSEMBLY REPLACEMENT

(Cont'd)

1.

Apply adhesive spray to channel (3) and mating surfaces of two rubber strips (2) and install rubber

strips (2) on channel (3).

2.

Apply adhesive spray to outside corner plates (4) and mating surfaces of two seals (1) and install

seals (1) on outside corner plates (4).

3.

Apply adhesive spray to two rear end closure assemblies (6) and mating surfaces of rubber

strips (5) and install rubber strips (5) on rear end closure assembly (6).

4.

Apply adhesive spray to right side of vehicle (8) and mating surface of rubber strip (7) and install

rubber strip (7) on right side of vehicle (8).

5.

Apply adhesive spray to left side of vehicle (10) and mating surface of rubber strip (9) and install

rubber strip (9) on left side of vehicle (10).

6.

Apply an even coat of sealant to two top enclosure assemblies (13), rear end closure assemblies (17),

corner edges (19), and other shaded areas.

7.

Apply sealant to top enclosure assembly clamps (11), plates (14), and screws (12).

NOTE

If raised edges or gaps exist around areas of outside corner plates

and rear end closure assembly, fill with sealant.

8.

Apply sealant to outside corner plates (15) and channel assembly (16).

9.

Apply sealant to any open gaps on rear end closure assembly (17) and vehicle body (18).

b. Installation

TM 9-2320-280-20-3

12-182

Change 2