TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 923 of 1168
12-187. BRUSHGUARD ASSEMBLY REPLACEMENT
TM 9-2320-280-20-3
12-310
Change 2
1.
Remove two nuts (15), washers (16), capscrews (20), and washers (16) from pivot brace (13).
2.
Remove two pins (18) from brushguard assembly (4) and quick-release brace (19) and remove
brushguard assembly (4) from pivot brace (13).
3.
Position brushguard assembly (4) on pivot brace (13) and install two pins (18) through brushguard
assembly (4) on quick-release brace (19).
4.
Install two washers (16), capscrews (20), washers (16), and nuts (15) on pivot brace (13).
NOTE
Perform these steps for three-piece brushguard only.
1.
Remove two nuts (22), washers (2), capscrews (3), washers (2), and tube assembly (1) from
brushguard assembly (4). Repeat step for other side.
2.
Install tube assembly (1) on brushguard assembly (4) with two washers (2), capscrews (3),
washers (2), and nuts (22). Repeat step for other side.
b. Tube Assembly Replacement
1.
Remove brushguard assembly (4) (task a).
2.
Remove two nuts (11), washers (12), capscrews (14), washers (12), and pivot brace (13) from
bumper (8).
3.
Install pivot brace (13) on bumper (8) with two washers (12), capscrews (14), washers (12), and nuts
(11).
4.
Install brushguard assembly (4) (task a).
c. Pivot Brace Replacement
1.
Remove two pins (18) from brushguard assembly (4) and quick-release brace (13) and lower brush-
guard assembly (4).
NOTE
Vehicles equipped with winch will not have nuts and washers as
indicated in steps 2 and 3.
2.
Remove two nuts (9), washers (10), capscrews (17), washers (10), and brace (19) from bumper (8).
3.
Install brace (19) on bumper (8) with two washers (10), capscrews (17), washers (10), and nuts (9).
4.
Raise brushguard assembly (4) and install two pins (18) through brushguard assembly (4) and brace
(19).
d. Quick-Release Brace Replacement
This task covers:
a.
Brushguard Assembly Replacement
d.
Quick-Release Brace Replacement
b.
Tube Assembly Replacement
e.
Lanyard Replacement
c.
Pivot Brace Replacement
INITIAL SETUP:
Applicable Models
M997A2, M1025A2, M1035A2, M1043A2,
M1045A2, M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
a. Brushguard Assembly Replacement
Back to Top
