TM-9-2320-280-24P-1
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST, VOLUME 1 OF 2
MARCH 2001
TM-9-2320-280-24P-1 - Page 26 of 1139
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
1. Scope.
This Repair Parts and Special Tools List (RPSTL) lists and authorizes spares and repair parts; special
tools; Test, Measurement, and Diagnostic Equipment (TMDE); and other special support equipment
required for performance of unit, direct support, and general support maintenance of the 1-1/4 ton, 4x4,
M998, M998A1, and M998A2 series vehicles. It authorizes the requisitioning, issue, and disposition of
spares, repair parts, and special tools as indicated by the Source, Maintenance, and Recoverability (SMR)
codes.
2. General.
This RPSTL is divided into the following sections:
a. Section II. Repair Parts List.
A list of spares and repair parts authorized for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with
the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in
item name sequence. Repair parts kits are listed separately in their own functional group within section II.
Repair parts for reparable special tools are also listed in this section. Items listed are shown on the
associated illustration(s)/figure(s).
b. Section III. Special Tools List.
A list of special tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION
AND USABLE ON CODE column) for the performance of maintenance.
c. Section IV. National Stock Number and Part Number Index.
A list, in ascending National
Item Identification Number (NIIN) (last nine numerals) sequence, of all National stock numbered items
appearing in the listing, followed by a list, in alphanumeric sequence, of all part numbers appearing in the
listings. National stock numbers and part numbers are cross-referenced to each illustration figure and item
number appearance.
3. Explanation of Columns (Sections II and III).
a. Item No. (Column (1).
Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2).
The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containing supply/requisitioning information, maintenance category authorization criteria, and
disposition instruction, as shown in the following breakout:
Source
Maintenance
Recoverability
Code
Code
Code
XX
1st two
XX
X
positions
How you get an item
3d position
4th position
Who determines
disposition
action on an
Who can install,
Who can do
unserviceable item
replace or use
complete repair*
the item
on the item
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance
tasks of the “repair” function in a use/user environment in order to restore serviceability to a failed item.
5th position
1
TM 9-2320-280-24P-1
Back to Top
