TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1056 of 1258

TM 9-2320-280-34

Change 1

2 2 -1 6 . 3

2 2 - 9 . 2 . LEFT FRONT FLOOR PANEL REPA

I R

This task covers:

a. Left Front Insert Panel Fabrication

f. Metal Strip D and Insert Panel Assembly

b. Metal Strips Fabrication

g. Metal Strip B and Insert Panel Assembly

c. Left Front Floor Panel Removal

h. Left Front Floor Panel and Insert Panel Drilling

d. Metal Strip Aand Insert Panel Assembly

i. Insert Panel and Left Front Floor Panel Installation

e. Metal Strip C and Insert Panel Assembly

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix G, Item 1)

Manual References

TM 9-2320-280-20

TM 9-2320-280-24P

TM 43-0139

Materials/Parts

One hundred ﬁve rivets

(Appendix E, Item 143)

Twenty-five rivets (Appendix E, Item 145.1)

Sheet metal (Appendix E, Item 200.1)

Adhesive (Appendix B, Item 1.1)

Adhesive sealant (Appendix B, Item 4.1)

Equipment Condition

• Fire extinguisher mount bracket removed

(TM 9-2320-280-20).

• Driver’s seat assembly removed

(TM 9-2320-280-20).

• Front and rear seat support panels removed

(TM 9-2320-280-20).

• Left floor insulation removed

(TM 9-2320-280-20).

Maintenance Level

General Support

NOTE

All dimensions are in inches.

1.

Cut insert panel (1) from sheet metal as shown and mark four reference lines (2) and directional

arrow (3) on insert panel (1).

a. Left Front Insert Panel Fabrication