TM-9-2320-280-34
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JANUARY 1996
TM-9-2320-280-34 - Page 131 of 1258
TM 9-2320-280-34
3-22.
ENGINE REMOVAL (6.2 L) (Cont ’d)
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
NOTE
It will be necessary to use an additional .5 in.
(13 mm) drive
extension 12 in.
(30 cm) to remove exhaust system mounting
hardware.
92.
Remove three locknuts (16), washers (2), capscrews (3), and washers (2) from crossover pipe (17) and
right exhaust manifold (4). Discard locknuts (16).
93.
Remove three locknuts (13), washers (12), capscrews (15), and washers (12) from crossover pipe (17)
and muffler (11).
Discard locknuts (13).
94.
Remove three locknuts (9), washers (7), capscrews (6), washers (7), and crossover pipe (17) from
left exhaust manifold (8).
Discard locknuts (9).
95.
Remove and discard gaskets (5), (10), and (14).
3-69
Back to Top
