TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 463 of 1258

TM 9-2320-280-34

7-3.

GOVERNOR MAINTENANCE (3L80)

This task covers:

a.

Removal

c.

Installation

b.

Inspection

INITIAL SETUP:

Applicable Models

Materials/Parts

All vehicles except: M997A2, M1025A2,

Cover gasket (Appendix E, Item 32)

M1035A2, M1043A2, M1045A2, M1097A2

Manual References

Tools

TM 9-2320-280-24P

General mechanic's tool kit:

automotive (Appendix G, Item 1)

Maintenance Level

Direct support

CAUTION

Area around governor must be thoroughly cleaned prior to removal

to prevent contamination.

a.

Removal

1.

Remove four capscrews (5), vent line clamp (4), governor cover (3), and cover gasket (2) from

transmission (1). Discard gasket (2).

2.

Remove governor (6) from transmission (1).

b.

Inspection

Inspect governor (para. 17-12).

c.

Installation

1.

Install governor (6) into transmission(1).

2.

Install cover gasket (2), governor cover (3), and vent line clamp (4) on transmission (1) with four

capscrews (5).

Tighten capscrews (5) to 17 lb-ft (23 N.m).

7-2