TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 569 of 1258

TM 9-2320-280-34

12-10. RIGHT ENGINE MOUNT BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Condition

General mechanic's tool kit:

Engine right mount and insulator removed

automotive (Appendix G, Item 1)

(para. 3-3).

Materials/Parts

Maintenance Level

Five locknuts (Appendix E, Item 59)

Direct support

Manual References

TM 9-2320-280-24P

a.

Removal

1.

Remove two locknuts (10), washers (1), capscrews (2), and washers (1

) from support bracket (8) and

engine mount bracket (5). Discard locknuts (10).

2.

Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).

3.

Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine

mount bracket (5) from frame rail (11). Discard locknuts (9).

b.

Installation

1.

Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7),

capscrews (6), washers (7), and locknuts (9).

2.

Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2),

washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 N ·m).

3.

Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).

12-12