TM-9-2320-280-34
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JANUARY 1996
TM-9-2320-280-34 - Page 70 of 1258
3 - 5 . RIGHT CYLINDER HEAD REPLACEMENT (Cont'd)
TM 9-2320-280-34
Change 1
3 - 1 2 . 1
NOT E
Use of cylinder head lifting device is optional.
3.1. Install cylinder head lifting device on center of cylinder head (4) with two washers (4.2) and
capscrews (4.1).
4.
Using hoist or other lifting equipment, remove cylinder head (4).
4.1. Remove and discard gasket (7).
4.2. Remove two capscrews (4.1), washers (4.2), and cylinder head lifting device from cylinder head (4), if
installed.
5.
For cylinder head (4) and valve repair procedures, refer to TM 9-2815-237-34.
Back to Top
