TM-9-2320-280-34
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JANUARY 1996
TM-9-2320-280-34 - Page 770 of 1258
TM 9-2320-280-34
16 - 5.
ARTIC HEATER EXHAUST PIPE REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-280-24P
automotive (Appendix G, Item 1)
General Safety Instructions
Materials/Parts
Do not touch hot exhaust system with bare hands.
Cotter pin (Appendix E, Item 10)
Four rivets (Appendix E, Item 142)
Maintenance Level
Direct support
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
a.
Removal
1.
Remove cotter pin (2) and exhaust pipe (3) from exhaust diverter box (1). Discard cotter pin (2).
NOTE
For instructions on the replacement of rivets, refer to para. 22-7.
2.
Remove four rivets (4) and exhaust pipe (3) from cowl (5). Discard rivets (4).
b. Installation
1.
Install exhaust pipe (3) on exhaust diverter box (1) with cotter pin (2).
2.
Install exhaust pipe (3) on cowl (5) with four rivets (4).
16-5
Back to Top
