TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 879 of 1258

1 7 - 2 0 . CENTER SUPPORT REPAIR (4L80-E) (Cont'd)

WARNING

Air pressure must not exceed 15 psi (103 kPa) when air checking clutch

piston, or injury to personnel or damage to equipment may result.

NOTE

Clutch piston must move up and down freely when air pressure is applied.

5.

Apply compressed air through center support bolt hole (7) to check operation of clutch piston (6).

6.

Install four oil seal rings (4) on oil delivery sleeve (5).

NOTE

Perform step 7 for 1997-1998 transmissions only.

7.

Install oil cooler pipe fitting seal (8) in center support (3).

TM 9-2320-280-34

Change 1

1 7 - 9 5