TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 898 of 1258

TM 9-2320-280-34

1 7 - 1 1 4

Change 1

1 7 - 2 5 . I N T E R M E D

I ATE CLUTCH ASSEMBLY AND FRONT BAND REPAIR (4L80-E)

INITIAL SETUP:

Applicable Models

M997A2, M1025A2, M1035A2,

M1043A2, M1045A2, M1097A2, M1123

Manual References

TM 9-2320-280-24P

Equipment Condition

Transmission disassembled into subassemblies

(para. 17-14).

Maintenance Level

General support

This task covers:

Inspection

NOT E

• Intermediate clutch plates, backing plate, and front band were

removed during disassembly. Inspect clutch plates only if they

will be reused.

• Work area should be well-ventilated, clean, and free from

blowing dirt and dust.

• Replaced damaged plates as a set.

• Wave plate is used on 1997-1998 transmissions only.

1.

Inspect wave plate (4.1), four clutch plates (3), and clutch plate assemblies (4) for cracks, wear,

evidence of overheating and scoring.

2.

Inspect backing plate (1) for cracks, breaks, scoring, and evidence of overheating. Replace if

damaged.

3.

Inspect front band (2) for cracks, loose or damaged anchor or pin ends, and worn or burned

composition material. Replace if damaged.

Inspection

1995 - 1996

1997 - 1998