TM-9-2320-283-20-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 1 OF 3
DECEMBER 1983
TM-9-2320-283-20-1 - Page 150 of 926
TM 9-2320-283-20-1
Table 2-1.
Unit Level Preventive Maintenance Checks and Services M915A1
Item
Interval
Item To Be
Procedures
Not Mission
No.
Inspected
Capable If:
CAUTION
If maintenance or new hub bearings are required
in either the forward-rear axle or rear-rear axle, it
will be necessary to tilt each side of the rear axles
to assure that adequate gear lube is supplied to
the individual hub bearings after installation.
52
Bien-
Forward
a.
Fill forward-rear axle and
nially
Rear and
rear-rear axle with proper gear
Rear-
lube and replace filler plugs.
Rear Axle
Hub
b.
Raise left side of rear axle
Bearings
approximately 4 inches above
the ground.
Maintain this
position for two minutes to allow
gear lube to flow into hub
bearings at the opposite or
right side.
Change 1
2-28.9
Back to Top
