TM 9-2320-283-20-1
TROUBLESHOOTING.
2-11.
TROUBLESHOOTING PROCEDURES (Continued).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
120.
BRAKES OVERHEAT (Continued).
Step 3.
Check for dragging brakes.
Adjust brakes (para 3-157).
Step 4.
Remove drum (para 3-204 thru 3-206), and inspect brake assembly.
Apply brakes lightly and observe shoe
movement for smooth operation.
Clean, repair, or replace defective components (para 3-158 thru 3-162).
Step 5.
Inspect wheel bearings for damage and proper lubrication.
Adjust, lube, or replace bearings (para 3-204 thru 3-207, as applicable).
121.
STOPLAMPS DO NOT OPERATE (BRAKES NORMAL).
Check for defective wiring or electrical connectors.
Refer to malfunction 56.
122.
PRESSURE GAGE(S) NOT INDICATING OR NOT ACCURATE (BRAKES NORMAL).
Step 1.
Disconnect affected air line(s) at gage(s), and press brake pedal.
If no air exhausts, the line is clogged or
broken.
Replace defective line or gage (para 3-163).
2-314