TM 9-2320-283-20-1
FUEL SYSTEM.
3-28.
ENGINE FUEL LINES AND FITTINGS REPLACEMENTS (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
REMOVAL.
1
Handle (1)
Loosen.
2
Retainer bar assem-
Remove from item (7).
bly (2).
3
Element (3)
Remove from item (7).
NOTE
Do not clean secondary filter element. Do not remove unless to replace with a new
element.
This should
be done after the outside element has been cleaned five times.
4
Wingnut (4) and
Remove from rod (9).
washer (5).
5
Element (6)
Remove from rod (9)
Rubber seal may stick
making removal diffi-
cult Work back and
forth to free.
B.
CLEANING.
WARNING
Do not use more than 30 psi of compressed
air
for
cleaning
purposes. Use protective equipment
(goggles/- shield,
gloves,
etc.)
to
prevent injury.
3-124