FUEL SYSTEM.
3-41.
ACCELERATOR PEDAL AND LINKAGE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
C.
INSTALLATION (Continued).
40.
Spring (18).
Hook to item (15) and to
bottom of cab.
41.
Seal (35) and
Slide over item (37).
retainer (34).
42.
Three screws (36).
Secure item (34) and item
(35) to cab floor.
43.
Screw (6) and
Screw in bracket (8) as far
Do not tighten item (7).
nut (7).
as it will go.
44.
Two screws (5),
Secure item (8) to cab floor.
washers (10),
and nuts (11).
45.
Two screws (2)
Secure item (3) to cab floor.
and nuts (9).
46.
Mat (38).
Put back in place.
47.
Pedal (1).
Put in bracket (3).
48.
Pin (4).
Drive in item (3) and item
(1).
49.
Pin (12).
Put in item (37) and item
(1).
50.
New pin (28).
Install in item (12).
51.
Lever (23).
Push toward rear of vehicle
as far as it will go.
52.
Nut (21) and ball
Screw on item (22) until
Do not pull on item
joint (20).
alined with hole in item
(22).
(23).
53.
Nut (17), washer
Secure item (20) to item
(16), and clip
(23).
(24).
3-202