TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

TM-9-2320-283-20-2 - Page 192 of 852

TM 9-2320-283-20-2

ELECTRICAL SYSTEM.

3.96.

STOPLAMP-TAILLAMP ASSEMBLY REPALCMENT (Continued)

LOCATION/ITEM

ACTION

REMARKS

NOTE

Stoplamp-taillamp-backup lamp replacement procedures are the same for both sides.

This

procedure

covers replace-ment of

the

left-side

stoplamp-taillamp-backup lamp.

A. STOPLAMP-TAILLAMP-BACKUP LAMP REMOVAL.

1.

Four screws (14).

Remove.

2.

Lens (13) and

Remove.

Discard item (12) if

gasket (12).

cracked or torn.

3.

Lamp (15).

Remove.

Backup lamp.

Push in

and turn a quarter turn

to the left.

4.

Lamp (11).

Remove.

Stoplamp-taillamp-turn

signal lamp.

Push in

and turn a quarter turn

to the left.

B. STOPLAMP-TAILLAMP-BACKUP LAMP INSTALLATION.

5.

Lamp (11).

Install.

Push in and turn a

quarter turn to the

right

6.

Lamp (15).

Install.

Push in and turn a

quarter turn to the

right

7.

Lens (13) and

Align and install.

Window for backup lamp

gasket (12).

on top.

8.

Four screws (14).

Install and tighten.

3-564