TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

TM-9-2320-283-20-2 - Page 214 of 852

TM 9-2320-283-20-2

ELECTRICAL SYSTEM.

3-98.

DOME LAMP AND SWITCH REPLACEMENT (Continued).

LOCATION/ITEM

ACTION

REMARKS

D.

DOME LAMP AND SWITCH ASSEMBLY INSTALLATION.

10. Wire (1).

Trim insulation back 0.375

inch from end.

11. Dome lamp and

Raise into position about

switch assembly

six inches from roof.

(8).

12. Insulated crimp-on

Insert bare end of item (1)

Use suitable crimping

butt connector

into item (2) and crimp

tool.

Make sure that no

(2).

securely.

bare wires are exposed

after crimping item (2).

13. Dome lamp and

Aline and install.

switch assembly

(8).

14. Two screws (4).

Install and tighten.

15. Batteries.

Connect.

E.

DOME LAMP AND SWITCH ASSEMBLY OPERATIONAL CHECK.

16. Switch (3).

Press twice.

Verify that

lamp comes on and goes off.

NOTE

Follow-on maintenance action required:

None.

3-586