TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 430 of 852
TM 9-2320-283-20-2
TRANSMISSION.
3-135.
TRANSMISSION SERVICING (Continued).
LOCATION/ITEM
ACTION
REMARKS
D.
INTERNAL OIL FILTER REPLACEMENT (Continued).
CAUTION
Do not apply grease to a cork gasket.
If necessary, a cement or sealer may
be applied, but only in the area
outside the raised bead on the oil pan
flange.
21. Pan (11) and new
a.
Position under item (1).
gasket (12).
b.
Secure with twenty-three
Torque items (10) to
items (10).
10-13 lb-ft.
22. Tube (4).
a.
Wrap threads with thread
Refer to paragraph 3-7.
sealing tape.
b.
Screw into item (11) and
tighten.
E.
FILLING
23. Gage (3).
Unscrew handle until loose
and pull out of item (4).
24. Transmission (1).
Fill with transmission fluid
Refer to LO 9-2320-
through item (4).
283-12.
25. Gage (3).
Push into item (4) and screw
in handle until tight.
26. Engine and trans-
a.
Start engine and shift
Refer to TM 9-2320-
mission.
transmission through all
283-10.
ranges to fill clutch
cavities and passages.
b.
Shift transmission to
neutral and let engine run
for one minute at 1,000
rpm to clear air from
system.
3-802
Back to Top
