TM 9-2320-283-20-2
TRANSMISSION.
3-140. MODULATOR CONTROL REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL. I
1.
Screw (15) and
Remove from item (12).
retainer (14).
2.
Control (11),
Remove from item (12)
Discard item (16).
Put
O-ring (16), and
item (13) in a safe
spacer (13)
place.
3.
Nut (18), screw
Remove from items (21)
(10), and clip
and (11).
(22).
4.
Two locknuts (24),
Remove from items (8) and
washer (25),
(11).
shim (7), and
U-bolt (6).
5.
Pin (1), washer
Remove from item (3), and
Discard item (1).
(2), and link
pull item (11) out from
(29)
under vehicle.
6.
Locknut (5) and
Remove from item (4).
pin (3).
7.
Spring (23)
Remove from item (8).
8.
Two screws (27),
Remove from item (9).
Iockwashers (26),
and bracket (8).
9.
Cap screw (19),
Remove from item (17).
washer (20), and
bracket (21).
B. CLEANING AND INSPECTION. I
10. All parts
Clean and inspect
Refer to paragraphs 3-4
and 3-5. If item (29)
is damaged, remove from
item (11) and replace.
11. Control (11)
Check for proper operation
Cable should have a
of cable
total travel of 1.5
inches from "at rest"
position.
3-840