TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 564 of 852
TM 9-2320-283-20-2
BRAKE SYSTEM.
3-160.
CAMSHAFT AND CAMSHAFT BRACKET REPLACEMENT (Continued)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Replacement of the six camshafts and
brackets is
similar.
Replacement of
left front is shown.
Nuts are used in
place of screws (7) for rear camshaft
brackets.
A. REMOVAL.
1.
Camshaft (4).
Remove from item (5) and
item (3).
2.
Four screws (7)
Remove from item (3) and
(nuts (7) for
item (5).
rear bracket) and
lockwashers (6).
3.
Bracket assembly
Remove from item (5).
(3).
4.
Fitting (8).
Remove from item (3).
5.
Two seals (1).
Pry from item (3).
Discard two items (1).
NOTE
Do not remove bushings, except to re-
place with new ones.
6.
Two bushings (2).
Remove from item (3).
a.
Use a hammer and
punch.
b.
Discard two items
(2).
B. CLEANING AND INSPECTION.
7.
All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
3-936
Back to Top
