TM-9-2320-283-20-3

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 3 OF 3

DECEMBER 1983

TM-9-2320-283-20-3 - Page 121 of 756

TM 9-2320-283-20-3

STEERING SYSTEM.

3-217.1.

STEERING STOP INSPECTION AND ADJUSTMENT PROCEDURES (Continued).

LOCATION/ITEM

ACTION

REMARKS

INSPECTION/ADJUSTMENT.

NOTE

Check that alignment marks on the pitman arm and

steering gear sector shaft are in alignment before per-

forming the steering stop adjustment procedure.

1.

King pin cover plate (1).

Remove three bolts (3) and king

pin cover plate (1) from steering

Remove all grease from

steering knuckle (2) and

top of exposed king pin

three bolts (3).

knuckle (2).

(4).

LEFT STEER ANGLE SHOWN

RIGHT STEER ANGLE OPPOSITE

2.

Template (5), steering

knuckle housing (2) and

three cover bolts (3).

Install.

Put template on top of

housing, and partially in-

stall bolts to position tem-

plate.

3-1304.2 Change 1