TM 9-2320-283-20-3
STEERING SYSTEM.
3-220. POWER STEERING LINES AND FITTINGS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
CAUTION
Dirt could severely damage the steer-
ing system.
Make sure work area is
clean,
and cover openings to keep dust
and dirt out.
A. COOLER TO PUMP HOSE REPLACEMENT.
1. Screw (12) and
clamp (13).
Remove from items (14), (3),
and (4).
2. Two straps (11).
Cut off of items (3) and (4). Discard items (11).
3. Grille.
Remove.
Refer to paragraph
3-263.
4.
Hose (4) and two
a. Loosen screws on two
clamps (1).
items (1).
b. Pull ends of item (4) off
Have a suitable con-
of items (6) and (15).
tainer ready to catch
an fluid from item
(4). Plug openings at
once.
c. Remove two items (1) from
item (4).
d. Pull item (4) out of item
(2).
5. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
6. Hose (4) and two
clamps (1).
a. Push one end of item (4)
through hole in item (2).
b. Install two items (1) onto
item (4).
3-1320