TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-297. HEATER VALVES, HOSES, TUBES, AND CLAMPS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. HEATER HOSES, TUBES, AND CLAMPS REPLACEMENT.
NOTE
l
Use standard shop maintenance prac-
tices to replace heater hoses, tubes,
and clamps.
l
For routing and location information
refer to illustration.
l
For specifications on making new heat-
er hoses refer to Appendix E.
B. CONTROL VALVE REMOVAL.
1. Screw (1) and clip
Remove from item (4).
(2).
2. Wire (3).
Remove from item (4).
3. Two clamps (6).
Loosen.
4. Valve (4) and two
Remove from item (9) and
clamps (6).
item (5).
C. CONTROL VALVE INSTALLATION.
5. Two clamps (6) and
Install in item (5) and
valve (4).
item (9).
6. Valve (4).
Manually turn off (counter-
clockwise).
7. Heater control
Push in.
Refer to TM 9-2320-283-
knob.
10.
8. Wire (3).
Install on item (4).
9. Screw (1) and clip
Secure item (3) to item
(2).
(4).
3-1732