TM 9-2320-283-34-1
COOLING SYSTEM.
3-17.
RADIATOR REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E.
ASSEMBLY (Continued).
18. Strips (5) and
a. Line up holes in items (5)
(6)
and (6) with holes in item
(11).
b. Set in place on item (11)
Items (5) and (6) will
be loose.
19. Bottom tank assem-
a. Line up scribe mark on
Be sure holes in items
bly (7) with
item (7) with mark on item
(7) and (8) line up
gasket (3) and
(11)
with holes in item (11).
attached saddle
assembly (8)
b. Secure finger tight with
Keep eight holes open
thirty-four items (9), new
at each end of item (7)
items (10), and items
and (11) for mounting
(12)
items (4) and (13).
(See illustration).
c. Alternately tighten
Tighten alternately to
thirty-four items (9)
prevent item (7) sealing
surface from warping.
20. Top tank assembly
Apply thin coat of silicone
(2)
sealant over sealing surface.
21. Two new gaskets
a. Line up holes in item (3)
(3)
with holes in item (2).
b. Push in position.
22. Strips (5) and
a. Line up holes in items (5)
(6)
and (6) with holes in item
(11).
b. Set in place.
Items (5) and (6) will
be loose.
3-82