TM 9-2320-283-34-1
ELECTRICAL SYSTEM.
3-21.
ALTERNATOR AND RECTIFIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
DISASSEMBLY (Continued).
8.
Housing (50) and
a. Remove three items (57)
Scribe an alinement
slipring housing
and three items (48),
mark on items (50) and
assembly (23).
retain three items (49)
(23) before separating.
with items (48).
CAUTION
Be sure that the drive end housing separates from the stator assembly and
that the stator assembly remains in the slipring housing assembly to avoid
damage to the stator leads.
b. Remove item (50) and item
If item (50) binds on
(54) as one assembly.
item (35), loosen by
tapping gently on
mounting ears with
rubber mallet.
c. Remove three items (2)
from the inside of item
(23).
d. Remove item (35) and set
Note wire locations for
aside.
assembly.
e. Remove three items (31)
Note wire locations for
and items (36) and (37).
assembly.
Set aside.
3-112