TM 9-2320-283-34-1
TRANSMISSION.
3-39.
CONVERTER HOUSING AND FRONT SUPPORT REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
B.
CLEANING AND INSPECTION.
7.
Support (3).
a.
Clean.
Refer to paragraph 3-4.
b.
Inspect item (27) care-
fully for any damage or
wear.
c.
Replace defective parts.
8.
All other parts.
a.
Clean and inspect.
Refer to paragraph 3-5.
b.
Replace any parts failing
inspection.
C.
ASSEMBLY.
NOTE
Do steps a and b only if roller bearing was removed from the front support.
9.
Support (3).
a.
Set new item (25) into
item (27) with part number
showing.
b.
Using item (40), press
Use tool number J-24197.
item (25) into item (27).
Seat item (25) fully.
c.
Place item (1) on bench
face down.
d.
Place new item (2) onto
Align all holes.
item (1).
e.
Set item (3) onto item
Align all holes.
(2).
f.
Install three items (19)
Use 2-1/2 inch long
into item (3) at location
screw.
A.
g.
Install item (20) into
Use 1-1/2 inch long
item (3) at location B.
screw.
3-318