TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 439 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3.40

CENTER SUPPORT REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

B.

CLEANING.

5.

All parts.

Clean.

Refer to paragraph 3-4.

C.

INSPECTION.

6.

All parts.

Inspect.

Refer to paragraph 3-5.

NOTE

Inspect center

support

cavities

for any obstruction or foreign material.

D.

ASSEMBLY.

NOTE

If

center

housing

bushing

was

not replaced, go to step 8.

7.

Bushing (11).

a. Place item (10) on press

with bushing bore facing

up.

b. Place new pre-bored item

(11) in item (10), care-

fully aline oil hole in

item (11) with item (10).

c. Using item (19), carefully

Use tool number J-28525-

press item (11) into item

2.

Be sure oil holes

(10).

are alined.

NOTE

Press center housing bushing flush to 0.010 inch below center support bore.

d. Swage bushing using swag-

Use tool number J-28525-

ing tool.

1.

Swaging secures the

bushing within the

center support.

3-386