TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 122 of 570

TM 9-2320-283-34-2

REAR TANDEM AXLES.

3-72. REAR-REAR AXLE REPLACEMENT (Continued).

LOCATION/ITEM

ACTION

REMARKS

4. Housing (4)

(continued).

One assistant may be

required to help remove

item (4) from under

frame. It will be neces-

sary for the assistant

to slide the chain from

the sides of the frame

while the floor crane

is being pulled away.

The floor jack may be

removed from under the

yoke of item (4). Do not

remove the two hydraulic

jacks from under item

(7).

5. All parts.

Clean.

Refer to paragraph 3-4.

6. All parts.

Inspect.

Refer to paragraph 3-5.

7. Housing (4).

Carefully position and

install under frame.

Refer to step 4 for cor-

rect placement of floor

crane and chain.

NOTE

After axle housing has been carefully

positioned under frame and onto equal-

izer beams, place a floor jack under

yoke of axle housing and slowly raise

front of axle housing so it rolls

upward.

This will help position the

torque rod to the top of the axle

housing supports.

3-678