TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 362 of 570

TM 9-2320-283-34-2

SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.

3-105. FRONT SPRING REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

7. All parts.

Clean and inspect.

Refer to paragraph 3-4

and 3-5.

8. Two bushings (2).

Drive into item (5).

9. Leaf (5).

Install in item (6).

10. Leaves (5)

thru (13).

a. Install on long drift pin

in order shown in illust-

ration.

b. Place on side in vise,

c. Slowly tighten vise until

items (5) thru (13) are

flat against each other.

d. Remove drift pin.

11. Screw (18) and

nut (4).

Install into items (5) thru

(13).

Torque items (4) to

75-85 lb-ft.

12. Two clips (16),

clip (19), three

Install onto items (5) thru

(13).

Torque items (14) to

48-55 lb-ft.

new rivets (17),

spacers (3),

screws (15), and

nuts (14).

13. Front spring

assembly (1).

Remove from vise.

NOTE

Follow-on maintenance action required:

Install front spring (TM 9-2320-

283-20).

3-918