TM 9-2320-283-34-2
CAB AND BODY.
3-110. CAB SHELL REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
39. Front left corner
Pull back far enough to reach Access hole located
of floormat.
access hole.
behind engine retarder
foot switch pedal.
40. Two screws (61),
Remove from two front items
Assistant helps remove
washer (62)
(63).
items (61), (62)
(lower) and nut
(lower), and (64). Upper
(64).
two items (62) stay in
place, Discard two items
(64).
41. Center rear part
Pull back far enough to
of floormat.
reach two access holes.
NOTE
One rear nut, screw, and lower washer
shown here.
Other rear nut, screw, and
lower washer removed in same way.
42. Two screws (61),
Remove from two rear items
Assistant helps remove
washers (62)
(63).
two items (61), (62)
(lower) and nuts
(lower), and (64).
(64).
Discard two items (64).
WARNING
Do not stand under or near cab when
lifting.
Cab could fall causing serious
injury to you and other personnel.
CAUTION
Air and electrical connectors may get
snagged as
cab is lifted.
Prevent
damage by moving them clear before lift-
ing cab.
43. Cab (1).
a. Attach guide ropes.
One assistant operates
hoist, other assistant
helps guide item (1)
onto wood blocks.
b. Using suitable lifting
Remove guide ropes.
device, raise item (1)
and lower onto wood blocks.
3-950