TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 472 of 570

TM 9-2320-283-34-2

CAB AND BODY,

3-115. REAR WINDOW REPLACEMENT (Continued)

LOCATION/ITEM

ACTION

REMARKS

NOTE

If fiber stick, item (1), is not

available,

make it out of formica

using illustration.

The approximate

dimensions

are:

1” decreasing to

1/64" high; 1/2" wide; and 10" long.

1. Rear window shield

Remove from item (3).

assembly (6), four

screws (8), and

lockwashers (7).

2. Seal (4).

a. Remove paint.

b. Insert tip of item (2)

into lock cavity.

Rub off with item (1).

c. Gently twist item (2)

If done correctly, item

and pull around complete

(4) should be open.

length.

3. Rear window assem-

bly (5).

a. While pulling outward,

Use item (1) and soap

work out of item (4)

solution to work item

around the top, sides

(4) over the edge of

and bottom.

item (5).

b. Remove item (5).

4. Seal (4).

Remove.

3-1028