TM 9-2320-285-24-1
2-79.
CAB TILT HYDRAULIC SYSTEM MAINTENANCE (CONT)
a.
Cab Tilt Hydraulic Pump (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
5
Hydraulic
Lines and fittings
Install and
Para 2-79b
hose
connect
assemblies
SERVICING
6
Hydraulic
a.
Filler plug (4)
Remove
pump
b.
Hydraulic pump
Fill
With transmission fluid
c.
Filler plug (4)
Install and
tighten
7
Hydraulic
a.
Pump handle
Position
In hydraulic pump
pump
WARNING
Stay out from under raised cab unless safety bar is
supporting full weight of cab.
Failure
to follow this
procedure could result in severe injury from falling
cab.
NOTE
Do not allow cab to fall quickly; velocity fuse will set and cab will not lower.
b.
Hydraulic pump
Operate
Alternately raise and lower
cab to make certain that
system is operating
properly
c.
Cab
Lower, if
To normal operating position
necessary
d.
Fluid level
Check
Add transmission fluid if
necessary (step 6 above)
e.
Pump handle (1)
a.
Remove
b.
Store
In holder in cab
2-901