TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 1018 of 1320

TM 9-2320-304-14&P

5-258

Direct Support and General Support Maintenance (Cont)

5-43.

CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).

(174)

Position sensor plate (193) with two

clamps on compression frame (192) as

shown.

(175)

Mark line around sensor plate (193) on

compression frame (192).

(176)

Remove two clamps and sensor

plate (193) from compression

frame (192).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

NOTE

Mix epoxy according to directions on

package.

(177)

Mix epoxy supplied with CHU kit and

apply to sensor plate (193) and

compression frame (192).

NOTE

Epoxy takes approximately 15 minutes to

cure.

(178)

Clamp sensor plate (193) to

compression frame (192) in position

marked until cured.

(179)

Remove clamps from compression

frame (192).

(180)

Prime and paint area as necessary

(TM 43-0139).

Change 1