TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 1282 of 1320

TM 9-2320-304-14&P

H-2

H-2. LHS BUSHING REMOVER/INSTALLER (SMALL).

Fabricate large LHS bushing remover/installer from 4 in. (101 mm) x 3.339 in. diameter steel stock.

a.

Turn round stock to 3.339 in.

±

.005 in.

b.

Cut a 1/4 in. (6 mm) x 45 degree chamfer where indicated.

c.

Drill through a 1.275 in. hole in the center of the 3.339 in. diameter steel stock where indicated.

d.

Starting at the end opposite of the chamfer, turn a length of 2.75 in. down to 3.146 in.

±

.005 in. where

indicated.

e.

Paint as required.